Siniat Standard Square Edge Plasterboard 2400 x 1200 x 12.5mm

It is designed for internal partitions, wall linings, and ceilings, suitable for undecorated surfaces or textured finishes. It can also be used with gypsum plaster.

It is made from gypsum.

It features a standard square edge, suitable for applications where the joints will be covered by decorative finishes or textured coatings.

The Siniat Standard Square Edge Plasterboard complies with BS EN 520 Type A, designed for normal fire, structural, and acoustic levels, but it is not a specialist fire-resistant board.

It is suitable for normal acoustic levels but may not be appropriate for high-performance soundproofing requirements.

No, this is a standard plasterboard designed for dry internal environments, not recommended for wet or humid areas like bathrooms.

Yes, once jointing and finishing are completed, the board can be painted or decorated as desired.

Common types include standard plasterboard, moisture-resistant, fire-resistant, soundproof, and insulated boards, each designed for specific applications.

Standard plasterboard usually ranges from 9.5mm to 12.5mm thick, with 12.5mm being the most common for walls and ceilings.

Plasterboard can be fixed using drywall screws onto timber or metal framing, or glued directly to existing surfaces in some cases.

Basic tools include a utility knife, drywall saw, T-square, sanding block, jointing tape, joint compound, and drywall screws.

Joints are taped and covered with joint compound (plaster), then sanded smooth before decorating.